Choose your model
Kickout Rock Slider Weld-Together Kit
Toyota 4Runner
Toyota Toyota 4Runner CO0575Product ID: 1676
Create an account to put this in your wishlist.
Go to wishlistCreate an account to put this in your wishlist.
Kickout Rock Slider Weld-Together Kit
Toyota 4Runner
Toyota Toyota 4Runner CO0575Product ID: 1676
Ships within 3-10 business days with 2 day shipping
Ships within 3-10 business days with 2 day shipping
Choose
your variation
4.6
( 215 Google reviews)
This is a DIY weld-together rock slider kit that is available in 65", 68" and 71" lengths. The 65" length fits the 1st-3rd gen 4Runner, 1st gen single cab Tacoma, FJ Cruiser, 1st-2nd gen Nissan Xterra and R50 Nissan Pathfinder. The 68" length fits the 4th-5th gen 4Runner, 80-series Land Cruiser, Lexus GX470 and GX460, and Nissan R51 Pathfinder. The 71" length fits the 100-series Land Cruiser, Lexus LX470 and Nissan Frontier.
When placing your order, please enter your vehicle year and model into the notes section so we can verify fitment
These aren't your average tube sliders. The square inner tubes, laser CNC-cut step plates and tapered ends really set these sliders apart. The inner rails and mounting legs are made from 2x2" wall square tubing and finished with massive CNC-cut frame mounting plates and gussets that ensure these sliders will stand up to the harshest abuse you can throw at them. Some sliders use skimpy round tubing mounting legs that weld directly to the side of the thin factory frame rails. These can dent the frame rails over time and even punch right through them under hard hits. With this kit, the provided frame plates spread impact loads evenly over your frame rails and provide a huge amount of surface area to place your welds. The massive CNC cut gussets bridge the angle between the mounting legs and mounting plates (the highest stress areas in the entire slider) and create super stiff sliders that will not bend or flex excessively under the most extreme conditions! As a nice finishing touch, the ends of the square main rails are tapered at a 45 degree angle to ensure that they will not become battering rams if faced with a rock or stump.
These sliders come in pieces that are pre-bent and pre-cut. Simply line them up as per the provided assembly directions and diagrams, weld them together, and install them on your truck. Simply put, these sliders make for a perfect first-time welding project! To make it even easier, the kits ship with clear and detailed step by step directions that are accompanied by professional CAD diagrams. The 6 (3 per side) mounting legs ship over-length so the sliders can be positioned at your preferred angle and distance from the vehicle. Angle them up tight to the rocker panels for maximum ground clearance or set them level to provide a convenient step to access your roof rack. The pictured sliders are set at a 15 degree angle to provide a happy medium.
When placing your order, please enter your vehicle year and model into the notes section so we can verify fitment
DIY Weld-together rock slider kit that arrives in CNC-laser cut and bent pieces that you then weld together - everything you need for assembly and installation included
Detailed instructions and diagrams - the step by step directions and professionally made diagrams make these a perfect first welding project
CNC-cut step plates look great, protect your rocker panels from rock debris spray and provide a convenient step to access to the cabin, roof rack and/or pickup bed
Multiple length options ensure full wheel well to wheel well protection for your vehicle
2x2 1/8" wall square tubing inner rails and mounting legs provide excellent foundational support compared to lesser round tube sliders
Massive frame mounting plates and gussets distribute forces evenly into your vehicle frame to prevent damage
Hilift jack can be used anywhere along the slider length to lift the vehicle
45 degree tapered inner rails to glance off obstacles
Sold in pairs
Kickout Rock Slider Weld-Together Kit
Toyota 4Runner 4Runner
CAD$ 663.64Product ID: 1676
3rd Gen 4Runner / Hilux Surf Hybrid Plate Rear Bumper Kit
CAD$ 799.00
Product overview
This is a DIY weld-together rock slider kit that is available in 65", 68" and 71" lengths. The 65" length fits the 1st-3rd gen 4Runner, 1st gen single cab Tacoma, FJ Cruiser, 1st-2nd gen Nissan Xterra and R50 Nissan Pathfinder. The 68" length fits the 4th-5th gen 4Runner, 80-series Land Cruiser, Lexus GX470 and GX460, and Nissan R51 Pathfinder. The 71" length fits the 100-series Land Cruiser, Lexus LX470 and Nissan Frontier.
When placing your order, please enter your vehicle year and model into the notes section so we can verify fitment
These aren't your average tube sliders. The square inner tubes, laser CNC-cut step plates and tapered ends really set these sliders apart. The inner rails and mounting legs are made from 2x2" wall square tubing and finished with massive CNC-cut frame mounting plates and gussets that ensure these sliders will stand up to the harshest abuse you can throw at them. Some sliders use skimpy round tubing mounting legs that weld directly to the side of the thin factory frame rails. These can dent the frame rails over time and even punch right through them under hard hits. With this kit, the provided frame plates spread impact loads evenly over your frame rails and provide a huge amount of surface area to place your welds. The massive CNC cut gussets bridge the angle between the mounting legs and mounting plates (the highest stress areas in the entire slider) and create super stiff sliders that will not bend or flex excessively under the most extreme conditions! As a nice finishing touch, the ends of the square main rails are tapered at a 45 degree angle to ensure that they will not become battering rams if faced with a rock or stump.
These sliders come in pieces that are pre-bent and pre-cut. Simply line them up as per the provided assembly directions and diagrams, weld them together, and install them on your truck. Simply put, these sliders make for a perfect first-time welding project! To make it even easier, the kits ship with clear and detailed step by step directions that are accompanied by professional CAD diagrams. The 6 (3 per side) mounting legs ship over-length so the sliders can be positioned at your preferred angle and distance from the vehicle. Angle them up tight to the rocker panels for maximum ground clearance or set them level to provide a convenient step to access your roof rack. The pictured sliders are set at a 15 degree angle to provide a happy medium.
When placing your order, please enter your vehicle year and model into the notes section so we can verify fitment
DIY Weld-together rock slider kit that arrives in CNC-laser cut and bent pieces that you then weld together - everything you need for assembly and installation included
Detailed instructions and diagrams - the step by step directions and professionally made diagrams make these a perfect first welding project
CNC-cut step plates look great, protect your rocker panels from rock debris spray and provide a convenient step to access to the cabin, roof rack and/or pickup bed
Multiple length options ensure full wheel well to wheel well protection for your vehicle
2x2 1/8" wall square tubing inner rails and mounting legs provide excellent foundational support compared to lesser round tube sliders
Massive frame mounting plates and gussets distribute forces evenly into your vehicle frame to prevent damage
Hilift jack can be used anywhere along the slider length to lift the vehicle
45 degree tapered inner rails to glance off obstacles
Sold in pairs
Key specifications
This is a DIY weld-together rock slider kit that is available in 65", 68" and 71" lengths. The 65" length fits the 1st-3rd gen 4Runner, 1st gen single cab Tacoma, FJ Cruiser, 1st-2nd gen Nissan Xterra and R50 Nissan Pathfinder. The 68" length fits the 4th-5th gen 4Runner, 80-series Land Cruiser, Lexus GX470 and GX460, and Nissan R51 Pathfinder. The 71" length fits the 100-series Land Cruiser, Lexus LX470 and Nissan Frontier.
When placing your order, please enter your vehicle year and model into the notes section so we can verify fitment
These aren't your average tube sliders. The square inner tubes, laser CNC-cut step plates and tapered ends really set these sliders apart. The inner rails and mounting legs are made from 2x2" wall square tubing and finished with massive CNC-cut frame mounting plates and gussets that ensure these sliders will stand up to the harshest abuse you can throw at them. Some sliders use skimpy round tubing mounting legs that weld directly to the side of the thin factory frame rails. These can dent the frame rails over time and even punch right through them under hard hits. With this kit, the provided frame plates spread impact loads evenly over your frame rails and provide a huge amount of surface area to place your welds. The massive CNC cut gussets bridge the angle between the mounting legs and mounting plates (the highest stress areas in the entire slider) and create super stiff sliders that will not bend or flex excessively under the most extreme conditions! As a nice finishing touch, the ends of the square main rails are tapered at a 45 degree angle to ensure that they will not become battering rams if faced with a rock or stump.
These sliders come in pieces that are pre-bent and pre-cut. Simply line them up as per the provided assembly directions and diagrams, weld them together, and install them on your truck. Simply put, these sliders make for a perfect first-time welding project! To make it even easier, the kits ship with clear and detailed step by step directions that are accompanied by professional CAD diagrams. The 6 (3 per side) mounting legs ship over-length so the sliders can be positioned at your preferred angle and distance from the vehicle. Angle them up tight to the rocker panels for maximum ground clearance or set them level to provide a convenient step to access your roof rack. The pictured sliders are set at a 15 degree angle to provide a happy medium.
When placing your order, please enter your vehicle year and model into the notes section so we can verify fitment
DIY Weld-together rock slider kit that arrives in CNC-laser cut and bent pieces that you then weld together - everything you need for assembly and installation included
Detailed instructions and diagrams - the step by step directions and professionally made diagrams make these a perfect first welding project
CNC-cut step plates look great, protect your rocker panels from rock debris spray and provide a convenient step to access to the cabin, roof rack and/or pickup bed
Multiple length options ensure full wheel well to wheel well protection for your vehicle
2x2 1/8" wall square tubing inner rails and mounting legs provide excellent foundational support compared to lesser round tube sliders
Massive frame mounting plates and gussets distribute forces evenly into your vehicle frame to prevent damage
Hilift jack can be used anywhere along the slider length to lift the vehicle
45 degree tapered inner rails to glance off obstacles
Sold in pairs
Key specifications
-
David Beaudet
-
Phillip Miller (ZomBud)
-
Gerry B
-
Eric T