2010-2013 5th Gen 4Runner Front Bumper Kit

This is a high clearance DIY weld-together bumper kit for the 2010-2013 Toyota 4Runner. It features a bolt-on design, protected winch mount, and one of the best approach angles of any bumper on the market. This bumper allows you to forget about approach angle and substantially improves the offroad capability of your 4Runner. It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 124lbs through careful design work.

The main section of this bumper is CNC-bent out of a single piece of  3/16" P&O Steel. This greatly reduces the amount of welding and grinding required by you and makes for a cleaner finished product. If you are paying to have the bumper assembled by a welding shop, this significantly lowers the cost.

The profile of this bumper has been designed with maximum ground clearance and approach angles put first. The bumper sits as high and tight to the front of the 5th gen 4Runner as possible, while the angled lower faces will smoothly slide over obstacles and ensure you do not get hung up on the trail. The side wings of this bumper wrap around to the front wheel wells and tie directly into the main frame mounting plates for true offroad protection. These side wings will take a serious hit without flexing or deflecting into the vehicle body. We know that most 5th gen 4Runner owners want to run oversized tires and more aggressive wheel offsets. This can create interference issues with the stock front bumper. We have thought ahead and specifically designed these bumper side wings to easily clear 35" tires.

We finished this bumper off with four integrated light buckets for surface mount LED pod lights (custom light cut outs available by request, such as light bar version shown), an integrated winch mount to accept all standard 8-12k lb winches with removable solenoids, and heavy duty 9/16" recovery points that are placed directly in line with the 4Runner frame to eliminate any leveraging effects. These recovery points are formed by laser cut steel plates that pass through the bumper shell and tie directly into the 4Runner frame as part of the bumper's main mounting brackets. The recovery points then get welded to the in and outside of the bumper shell. These factors all combine to form recovery points that minimize stress on your 5th gen 4Runner frame and are essentially indestructible! What could make this bumper even better? The low profile design has resulted in very reasonable weights of 124lbs for the steel bumper and 61lbs for the aluminum version. Considering that this bumper replaces your factory bumper and associated components, the resulting weight increase to your 4Runner is minimal. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.

• DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)

• CNC-bent plates greatly reduces amount of welding and grinding required by you and makes for a cleaner finished product

• Low profile design is engineered to provide maximum ground clearance and complement the factory body lines - this bumper protrudes less than 2.5" from the center of the grill!

• Maintains part of the factory plastic bumper for reduced weight - trimming of factory plastic bumper required

• Heavy duty 3/16" plate steel construction for maximum offroad strength and durability

• Optional 1/4" 5052 aluminum for a lightweight yet very durable overlanding setup (63lb weight savings)

• Bolts directly to frame using a total of 10 factory mounting points - no drilling required

• Protected winch mount fits all standard 8000-12,000lb winches with removable solenoids

• Integrated 9/16" thick clevis mounts allow the use of 3/4" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles

• slotted mounting tabs give tons of adjustment to fit a wide variety of surface mount pod lights

• Integrated license plate mount

• Optional heavy duty grill and headlight tubing for added protection

• 2" round cut out in each side wing to accommodate the replacement turn signal