My Site Preloader
menu

2nd Gen 4Runner / Hilux Surf High Clearance Rear Plate Bumper Kit

Toyota 4Runner

1990-1995

Toyota Toyota 4Runner CO0915

ID product: 1585

CAD$ 786.14

Choose
your variation

  • Body Lift Adjustment (NOT suspension lift)
      Choose an option
    • 1" Body Lift

      The 1" body lift option is only for if you have a 1" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + CAD$ 32.00

    • 1.5" Body Lift

      The 1.5" body lift option is only for if you have a 1.5" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + CAD$ 45.00

    • 2" Body Lift

      The 2" body lift option is only for if you have a 2" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + CAD$ 65.00

    • 3" Body Lift

      The 3" body lift option is only for if you have a 3" body lift installed on your vehicle. If you have any type of suspension lift (coilovers, new shocks and coils, spacer lifts, leveling kits, etc) you will want to select the "no body lift" option.

      Price: + CAD$ 85.00

  • Cree LED Lights
      Choose an option
    • Two 24W Cree LED Pod Lights

      Includes two 24W 2300 Lumen CREE LED Lights with a spot/flood combo beam pattern and great adjustability. Simply splice them into your existing factory fog light wiring for an easy install that keeps your factory fog light switch

      Price: + CAD$ 88.00

    • Two 40W Cree LED Pod Lights

      Includes two 40W 3800 Lumen CREE LED Lights with a spot beam pattern and great adjustability. Simply splice them into your existing factory fog light wiring for an easy install that keeps your factory fog light switch

      Price: + CAD$ 119.00

    • Two 24W Cree LED Pod Lights with Full Wiring Harness and Switch

      Includes two 24W 2300 Lumen CREE LED Lights with a spot/flood combo beam pattern and great adjustability. Includes full wiring harness with switch, relay and industry-standard DT connectors

      Price: + CAD$ 125.00

    • Two 40W Cree LED Pod Lights with Full Wiring Harness and Switch

      Includes two 40W 3800 Lumen CREE LED Lights with a spot beam pattern and great adjustability. Includes full wiring harness with switch, relay and industry-standard DT connectors

      Price: + CAD$ 158.00

  • Material
      Choose an option
    • Steel

      Our steel bumpers are constructed out of 3/16” thick P&O hot rolled steel, NOT cheaper mild steel. Compared to aluminum, steel provides high strength and durability and is easier to weld. It also comes in at a pricepoint much lower than aluminum

      Price: + CAD$ 0.00

    • Aluminum

      Our aluminum bumpers are constructed out of ¼” thick 5052 aluminum. Aluminum provides great corrosion resistance and substantial weight savings over steel. While it is still very strong and durable, it will sustain dents and scratches easier than steel if you like to play hard in the rocks

      Price: + CAD$ 1,095.00

  • Swing Out Carrier
      Choose an option
    • Dual Swing Out Carrier with Dual Gas Can Holder

      This option gives you two swing arms with space to mount a full size spare tire, hilift jack, and two 20L NATO gas cans. The gas can holder is lockable and is included with this option. The swing out arms use a 2/3 – 1/3 split to maximize gear-mounting options. Please see our "Rear Swing Out" FAQ section for more details on our Swing Out product options.

      Price: + CAD$ 1,105.00

    • Single Swing Out Carrier

      This option gives you a single swing arm with space to mount a full size spare tire and tabs suitable for mounting a hilift jack and other recovery gear. This swing arm spans roughly 2/3 of the width of the rear hatch/ tailgate. This option does not include our dual gas can holder.

      Price: + CAD$ 650.00

  • Recessed Hitch Receiver
      Choose an option
    • No

      "If you select this option, your bumper will not come with any hitch receiver. Most of our bumpers are designed with flat bottoms to maintain compatibility with the factory hitch receiver but some models may lose significant ground clearance (please confirm with us for your specific vehicle model) "

      Price: + CAD$ 0.00

    • Yes

      This option refers to a weld-in 2” hitch receiver. This hitch receiver is recessed into the bumper shell for a clean look and maximum ground clearance. The hitch pin is accessed from above or from behind. Since the welding process is out of our hands, these hitch receivers are not rated for on-road towing. They are only intended for hitch mounted accessories such as bicycle racks and for off-road use as a recovery point.

      Price: + CAD$ 65.00

  • 3/4" Recovery Shackle (Pair)
      Choose an option
    • No

      Omits the pair of 3/4" recovery shackles. Your bumper will still come with built in attachment points for the recovery shackles of your choice.

      Price: + CAD$ 0.00

    • Yes

      Adds a pair of 3/4" Recovery shackles. These shackles have a 7/8" diameter pin, black powder coat finish, and rubber isolators to eliminate noise and protect your other recovery equipment

      Price: + CAD$ 39.00

CAD$ 786.14 CAD$ 786.14 786.14 CAD

CAD$ 786.14

Add to Cart
"2nd Gen 4Runner / Hilux Surf High Clearance Rear Plate Bumper Kit" has been added to your cart.
description

This is a high clearance DIY weld-together bumper kit for the 2nd generation (1990-1995) Toyota 4Runner. It features a bolt-on design, recessed 2" receiver hitch, and one of the best departure angles on the market. The sloping rear profile and recessed hitch receiver further increase clearance and provide a smooth surface to slide across obstacles and ditch crossings. Simply put, this bumper allows you to forget about departure angle and substantially improves the offroad capability of your 4Runner! It offers excellent protection from rocks, trees and animal strikes and has been kept to a weight of 98lbs through careful design work.


This bumper has been designed to provide the absolute maximum departure angle and ground clearance without cutting into the body of your 4Runner. The rear profile of the bumper slopes inwards towards the vehicle and hugs the rear of the frame as tight as possible. This sloped profile combined with the recessed hitch receiver result in a rear end that easily slides over trail obstacles rather than hanging up on them and impeding your forward progress up the trail! Simply put, this bumper allows you to forget about departure angles and substantially improves the offroad capability of your 4Runner!

This bumper features heavy duty 3/16" steel or 1/4" aluminum construction, heavy duty recovery points, and an optional 2" hitch receiver that is recessed into the bumper shell for maximum clearance and a clean appearance (many people don't even notice its there!). This bumper gives excellent protection from trail obstacles, trees and inattentive motorists. The 9/16" thick D-ring shackle mounts tie directly into the vehicle frame for confident recoveries and the optional surface mount LED pod lights come with slotted mounting tabs to mount the lights on top of the bumper or swing outs, keeping them out of harms way. To protect the vulnerable rear corners of your 4Runner, this bumper is also available with optional tubing side hoops that will help push your 4Runner away from trees and rock walls.

Unlike many aftermarket bumpers that are more or less empty shells with minimal reinforcement, this bumper contains extensive internal ribbing and mounts to the bottom, and sides of the vehicle frame for unmatched strength and stiffness. The bumper side wings are fully plated in on the bottom for a smooth sliding surface and link directly into the vehicle frame with 3/16" plate and large reinforcing gussets. These bumper side wings can take serious offroad hits without flexing into the vehicle body. With this bumper, you'll be able to tackle challenging trails with a new level of confidence knowing that the rear end of your 4Runner is now nearly invincible!

The ultra low-profile design of this bumper keeps the weight extremely reasonable at 98lbs in steel and 49lbs in aluminum while maintaining excellent strength. This is especially noteworthy when you consider the fact that the factory hitch receiver, frame crossmember and rear bumper all get removed before installing the Coastal Offroad bumper. This means that even with our steel bumper version, the total weight increase to your vehicle is negligible at best. This minimizes added stress on your vehicle, maintains precious payload capacity, and allows you to keep your factory suspension if desired.

The swing out tire carrier comes in either a single or dual sided configuration and is built to accept a tire up to 37" in diameter. Both carriers include mounting brackets for a hilift jack and other recovery items. The dual swing out includes the hilift mount as well as a lockable jerry can holder designed to fit two 20L NATO style jerry cans. These carriers feature heavy duty chromoly double heim joint hinges, massive 3/8" steel mounting brackets, 2000lb toggle latches, T-handle spring pins, and a replaceable UHMW catch pad that provides secure, rattle free operation. The heim joints in conjunction with the toggle latch provide tons of adjustability, allowing for easy assembly and guaranteed alignment of the carrier latch. The single swing out add-on weighs 34lbs and the dual swing out add-on with gas can holder weighs 77lbs.

  • DIY Weld-together kit - This bumper arrives as precision CNC-laser cut pieces that you then weld together (detailed assembly instructions included)

  • Slim profile is engineered to provide maximum ground clearance and complement the factory body lines

  • Heavy duty 3/16" plate steel construction for maximum offroad strength and durability

  • Optional 1/4" 5052 aluminum construction for a lightweight yet very durable overlanding setup (49lb weight savings)

  • Optional recessed 2" hitch receiver for a clean look and further clearance gains (While the hitch is very well reinforced, we cannot rate it for on-road towing due to the DIY welding nature of this kit)

  • Mounts directly to frame using 8 factory mounting points for unbeatable strength and no drilling required.

  • Reinforced 9/16" thick clevis mounts allow the use of 3/4" D-Rings and pull directly off of the frame for confident recoveries of heavily loaded vehicles

  • All kits ship as clean, bare metal that is ready to weld out of the box - the Nitrogen laser cutting technology means no cutting edge oxidation and thus easier and stronger welds

  • Optional Single and Dual Swing out carriers with spare tire mount, hilift jack mount and locking dual NATO can holder (dual swing out only)

  • Optional LED lights include adjustable mounting tabs to mount the lights either on the swing outs or on top of the bumper

Read more
additionnal information
Body Lift Adjustment (NOT suspension lift)
None | 1" Body Lift | 1.5" Body Lift | 2" Body Lift | 3" Body Lift
Cree LED Lights
None | Two 24W Cree LED Pod Lights | Two 40W Cree LED Pod Lights | Two 24W Cree LED Pod Lights with Full Wiring Harness and Switch | Two 40W Cree LED Pod Lights with Full Wiring Harness and Switch
Material
Aluminum (+1095) | Steel
Swing Out Carrier
Dual Swing Out Carrier with Dual Gas Can Holder | None | Single Swing Out Carrier
Recessed Hitch Receiver
No | Yes(+65)
3/4" Recovery Shackle (Pair)
No | Yes
bumper weight

Steel base bumper weight: 94lbs

Aluminum base bumper weight: 46 lbs

  • User Review David Beaudet

    Purchased a high clearance bumper kit for my son’s 2nd generation Tacoma. He had almost zero welding experience and thought this would be a great cras...

  • User Review Phillip Miller (ZomBud)

    Fantastic bumper, even for a novice welder. I really liked how all the pieces just fit together, and the locating tabs were also a big help. The one i...

  • User Review Gerry B

    The small shop that can AND DOES!!! A project type that always has challenges and no surprise I did. Bandon and the Coastal Offroad team were extrem...

  • User Review Eric T

    This company is top notch! They were fast and communicated throughout the whole process. The kit was perfect too… very happy with whole package and it...

  • User Profil David Beaudet

    Purchased a high clearance bumper kit for my son’s 2nd generation Tacoma. He had almost zero welding experience and thought this would be a great cras...

  • User Profil Phillip Miller (ZomBud)

    Fantastic bumper, even for a novice welder. I really liked how all the pieces just fit together, and the locating tabs were also a big help. The one i...

  • User Profil Gerry B

    The small shop that can AND DOES!!! A project type that always has challenges and no surprise I did. Bandon and the Coastal Offroad team were extrem...

  • User Profil Eric T

    This company is top notch! They were fast and communicated throughout the whole process. The kit was perfect too… very happy with whole package and it...

you may

also like

Toyota 4Runner

1st Gen 4Runner/ Hilux Surf and 2nd Gen Pickup / Hilux High Clearance Front Bumper Kit

CAD$ 722.10

see more

Toyota 4Runner

2nd Gen 4Runner / Hilux Surf High Clearance Front Bumper Kit

CAD$ 722.10

see more

Toyota 4Runner

Kickout Rock Slider Weld-Together Kit

CAD$ 663.64

see more

Universal Products

Swing Out Carrier Systems

CAD$ 645.30

see more

Toyota 4Runner

1st Gen 4Runner/ Hilux Surf and 2nd Gen Pickup / Hilux High Clearance Front Bumper Kit

CAD$ 722.10

see more

Toyota 4Runner

2nd Gen 4Runner / Hilux Surf High Clearance Front Bumper Kit

CAD$ 722.10

see more

Toyota 4Runner

Kickout Rock Slider Weld-Together Kit

CAD$ 663.64

see more

Universal Products

Swing Out Carrier Systems

CAD$ 645.30

see more